Cable Transformer Gis 110kv Withstand Voltage Hipot Tester AC Resonant Test System

Product Description

Product Description

The variable frequency series resonant test device is mainly designed for AC withstand voltagetests of cross-linked cables,hydro generators,main transformers,busbars,GIS,etc.It has a widerange of applications and is an ideal withstand voltage testing device for high voltage testingdepartments at the regional,city,and county levels,as well as for power installation,repair,andtesting units.
The variable frequency series resonant test device is primarily composed of a variable frequencycontrol power supply,excitation transformer,reactor,capacitive divider,and optionalcompensation capacitor.
Suitable for the commissioning and preventive testing of large capacity,high voltage capacitivetest samples.The device features over-voltage,over-current,zero start,and system detuning(flash-over)protection functions.The entire device is lightweight,making it convenient for on-site use.
 

Product Features

1. Significantly Reduced Power Supply Capacity.Series resonant power sources use resonantreactors and the test sample's capacitance to generate high voltage and high current.In the entiresystem,the power supply only needs to provide the active power consumption,so the requiredpower supply capacity is only 1/Q of the test capacity.

2. Greatly Reduced Weight and Volume.The series resonant power source eliminates the need forbulky high-power voltage regulators and ordinary high-power power frequency test transformers.The resonant excitation power supply only needs 1/Q of the test capacity,significantly reducing thesystem's weight and volume,typically to 1/10 to 1/30 of conventional test devices.
Improved Output Voltage Waveform.The resonant power source acts as a resonant filter circuit,improving the output voltage waveform distortion,achieving a good sine wave,and effectivelypreventing harmonic peak values from causing false breakdowns of the test sample.

3. Prevention of Large Short-Circuit Currents.In a series resonant state,if the test sample'sinsulation weak point is broken down,the circuit immediately detunes,and the loop current quicklydrops to 1/Q of the normal test current.In contrast,with parallel resonance or test transformermethods,the breakdown current immediately increases dozens of times,resulting in short-circuitand breakdown currents differing by hundreds of times.Therefore,series resonance effectivelyidentifies insulation weak points without the risk of large short-circuit currents damaging the faultpoint.

4. No Recovery Over-voltage.When the test sample breaks down,the high voltage immediatelydisappears due to the loss of resonance,the arc extinguishes instantly,and the reestablishmentprocess of the recovery voltage is very long,making it easy to disconnect the power beforereaching flash-over voltage again.This recovery process is a kind of energy accumulationintermittent oscillation process,which is long and does not generate any recovery over-voltage.

Detailed Photos

Product Parameters

Product Model	Product Basic Configuration
	Variable Frequency Power Supply	Exciation Transformer	High Voltage Resonant Reactor	Capacitive Voltage Divider	Applicable Range
HZBP-88kVA/44kV	HZBP-5kW- 1 set	JLB-5kVA-1 set	HZDK-44kVA/22kV-2 sections	FRC-50kV-1 set	8.7/10kV, /AC Withstand Voltage Test for Cables Below 300mm² up to 2km; AC Withstand Voltage Test for Electrical Equipment in 10kV Substations
HZBP-75kVA/75kV	HZBP-6kW-1 set	JLB-6kVA-1 set	HZDK-25kVA/25kV- 3 sections	FRC-80kV- 1 set	8.7/10kV, AC Withstand Voltage Test for Cables Below 300mm² up to 2km; AC Withstand Voltage Test for Electrical Equipment in 10kV Substations
HZBP-132kVA/66kV	HZBP-6kW-1 set	JLB-6kVA-1 set	HZDK-44kVA/22kV- 3 sections	FRC-70kV- 1 set	8.7/10kV, AC Withstand Voltage Test for Cables below 300mm²up to 3km; 26/35kV, below 300mm² up to 1km; AC Withstand Voltage Test  for Electrical Equipment in 10kV Substations
HZBP-176kVA/66kV	HZBP-10kW-1 set	JLB-10kVA-1 set	HZDK-44kVA/44kV- 4 sections	FRC-70kV- 1 set	8.7/10kV, AC Withstand Voltage Test for Cables below 300mm² up to 4km; 26/35kV, AC Withstand Voltage Test for Cables below 300mm² up to 1km; AC Withstand Voltage Test fornElectrical Equipment in 10kV Substations
HZBP-135kVA/108kV	HZBP-7.5kW-1 set	JLB-7.5kVA-1 set	HZDK-33.75kVA/27 kV-4 sections	FRC-110kV-1 set	8.7/10kV, AC Withstand Voltage Test for Cables below 300mm² up to 3km; 26/35kV, AC Withstand Voltage Test for Cables below 300mm² up to 1km; AC Withstand Voltage Test for Electrical Equipment in 10kV Substations
HZBP-270kVA/108kV	HZBP-25kW-1 set	JLB-25kVA-1 set	HZDK-67.5kVA/27k V-6 sections	FRC-110kV-1 set	8.7/10kV, AC Withstand Voltage Test for Cables below 300mm² up to 9km; 26/35kV, below 300mm² up to 3km; AC Withstand Voltage Test for Electrical Equipment in 10kV Substations
HZBP-405kVA/108kV	HZBP-25kW-1 set	JLB-25kVA-1 set	HZDK-67.5kVA/27k V-6 sections	FRC-110kV-1 set	8.7/10kV, AC Withstand Voltage Test for Cables below 300mm² up to 9km; 26/35kV, below 300mm² up to 3km; AC Withstand Voltage Test for Electrical Equipment in 10kV Substations
HZBP-540kVA/108kV	HZBP-30kW-1 set	JLB-30kVA-1 set	HZDK-67.5kVA/27k V-8 sections	FRC-110kV-1 set	8.7/10kV, AC Withstand Voltage Test for Cables below 300mm² up to 12km; 26/35kV, below 300mm² up to 4km; AC Withstand Voltage Test for Electrical Equipment in 10kV Substations
HZBP-648kVA/270kV	HZBP-25kW-1 set	JLB-25kVA-1 set	HZDK-72kVA/45kV- 9 sections	FRC-270kV-1 set	8.7/10kV, AC Withstand Voltage Test for Cables below 300mm² up to 6km; 26/35kV, below 300mm² up to 2km; 64/110kV, below 300mm² up to 1km; AC Withstand Voltage Test for Electrical Equipment in 10kV, 35kV, 110kV Substations

Product Dimension

Company Profile

Similar Recommendation

FAQ

Q1:Is your company a sales or a manufacturer? 
We are an integrated trade and manufacturing company with our own factory. 

Q2:If we need to customize our own brand or if there are special requirements for the built-in software of the machine, can it be customized?
Yes, we accept OEM/ODM/OBM and can customize the built-in software of the product according to the customer's special requirements.

Q3:What is the usual lead time? How long can we receive the order after placing it?
In normal circumstances, products in stock can be received within 5 to 7 days via the fastest international express. Other situations may vary depending on the quantity of products ordered, whether there are special customization requirements, and the delivery time chosen.

Q4:How can we ensure that the product will not be damaged during transportation, considering the large size of the product?
We have professional internal and external packaging to ensure the safety and stability of the products during transportation. For fragile or other special parts, we will include an extra set to ensure that the customer can use the product immediately upon receipt.

Q5:How do you handle after-sales service? What if there is a quality problem with the product or if the customer does not know how to operate it? 
For quality issues that are not caused by human error, we provide a one-year warranty from the time the product is delivered, and lifetime technical support. Other after-sales issues will be addressed by our professional technical staff within 24 hours. The product comes with a user manual and an operation video.