Portable Intelligent Distribution Transformer Characteristic Comprehensive Test Equipment

Product Description

Product Description

For a power system,the transformer is a core component,and the long-term and reliableoperation of the transformer is crucial for the stability and reliability of the entire system.
This instrument is designed with fully intelligent one-touch testing functions for DCresistance andturns ratio testing.Based on the set testing parameters,it intelligently identifies thecurrent tapposition of the transformer, automatically tests and saves the turns ratio and DC resistancedata for that tap position.

Product Features

1. Intelligent Testing Function;

2. Single Connection;

3. DC Resistance Testing Function;

4. Turns Ratio Testing Function;

5. Loss Testing Function;

6. Insulation Resistance TestingFunction;

7. Equipped with various wired and wirelesscommunicationinterfaces for easy expansion of instrument functions;

8. Embedded Linux Operating System;

9. Dual-core Architecture;

10. Industrial-grade 7-inch Display;

11. Large-capacity Lithium Battery.

Detailed Photos

Product Parameters

Thermal Printer Function
Output Current	20A,10A,5A,1A,0.1A,≤10mA
Measurement Range	20 A gear    0.5mΩ~ 100mΩ   10 A gear    1.0mΩ~ 300mΩ 5A gear     10mΩ~ 1.0 Ω    1A gear     200mΩ~ 6.0 Ω 0.1A gear    2.0 Ω ~ 60 Ω ≤10mA gear  30 Ω~ 50kΩ
Accuracy	±(reading×0.2% + 2digits)
Turns Ratio Testing
Measurement Range	0.9~10000
Accuracy	±(reading×0.1% + 2digits)(reading≤500) ±(reading×0.2% + 2digits)(5003000) ±(reading×0.3% + 2digits)(reading<3000)
Resolution	0.9~9.9999(0.0001)       10~99.999(0.001) 100~999.99(0.01)         10000 above (1)
Capacity and No-load Testing
Measurement Range	Voltage: AC 50V~850V   Current:AC 0.5A~100A Capacity: 30kVA~65000kVA
Accuracy	Voltage,Current     ±(reading×0.2% + 2digits) Power (0.2≤cosφ≤1)   ±(reading×1.0% + 2digits) Capacity            ±(reading×10% + 2digits)
Insulating Resistance Testing
Output Voltage	500V,1000V,2500,5000V for optional
Short-circuit Current	1mA~5mA for optional		Current Measurement Range	10mA
Current Measurement Accuracy	±(reading×5%+0.2nA)		Capacitance Measurement Range	20μF
Capacitance Measurement Accuracy	±(reading×15%+0.03nA)		Capacitance Discharge Rate	From 10000V to 10V,0.5S/μF
Range	500V	1000V	2500V	5000V
Accuracy
No specified	<100kΩ	<100kΩ	<100kΩ	<100kΩ
5%	100kΩ~10GΩ	100kΩ~20GΩ	100kΩ~100GΩ	100kΩ~ 10GΩ
20%	10GΩ~ 100GΩ	20GΩ~200GΩ	100GΩ~ 1TΩ	100GΩ~ 1TΩ
No specified	>100GΩ	>200GΩ	>1TΩ	>1TΩ
Operating Conditions and Dimension
Operating Power	Built-in lithium battery, capacity is 11AH
Charging Voltage	AC220V
Operating Temperature	-10ºC~50ºC
Relative Temperature	≤90%,no condensation
Weight	12kg
Dimensions	438×318×190mm

1.  Capacitive Touch Screen

Display Size: 7 inches   Resolution:1024*600

1. Test Terminals
   High-voltage connection to transformer high-voltage side; Low-voltage connection to transformer low-voltage side.

1. Terminal for loss testing.

1. Terminal for industrial resistance testing

1. Control knob for instrument operation

1. Emergency Stop Button

   Stops testing during any process when pressed, must reset the emergency stop button for subsequent use.

1. External Communication Port

   For connecting external PCs for data communication or external modules for function expansion.

1. USB Port

For external USB driver to store test data; do not remove the USB drive during storage.

1. Printer

Prints test results.

1. Provides voice prompts.

1. Lithium Battery Charging Socket

   Connect the provided three-pin power cable and plug into a 220V AC power source to charge the instrument, the fuse holder and socket are integrated. Use a fuse of specification 250V/2A, size φ5mm×20mm. Red light indicates charging; green light indicates charging completion.

1. Grounding Terminal

The instrument must be reliably grounded; remove any paint or rust from
the grounding point.

1. Power Switch

Short press for 2 seconds to turn on the instrument; long press for 3 seconds to turn off the instrument

Product Accessories

Company Profile

Similar Recommendation

FAQ

Q1:Is your company a sales or a manufacturer? 
We are an integrated trade and manufacturing company with our own factory. 

Q2:If we need to customize our own brand or if there are special requirements for the built-in software of the machine, can it be customized?
Yes, we accept OEM/ODM/OBM and can customize the built-in software of the product according to the customer's special requirements.

Q3:What is the usual lead time? How long can we receive the order after placing it?
In normal circumstances, products in stock can be received within 5 to 7 days via the fastest international express. Other situations may vary depending on the quantity of products ordered, whether there are special customization requirements, and the delivery time chosen.

Q4:How can we ensure that the product will not be damaged during transportation, considering the large size of the product?
We have professional internal and external packaging to ensure the safety and stability of the products during transportation. For fragile or other special parts, we will include an extra set to ensure that the customer can use the product immediately upon receipt.

Q5:How do you handle after-sales service? What if there is a quality problem with the product or if the customer does not know how to operate it? 
For quality issues that are not caused by human error, we provide a one-year warranty from the time the product is delivered, and lifetime technical support. Other after-sales issues will be addressed by our professional technical staff within 24 hours. The product comes with a user manual and an operation video.